Archive

AL 130 A 8 OHM

13 cm (5") High-End low midrange driver similar to AL 130 8 OHM, but with black cone and modified basket.

AL 170 A 8 OHM

17 cm (6.5") High-End low midrange driver similar to AL 170 8 OHM, but with black cone.

AL 200 DV 2x8 OHM

20 cm (8") High-End woofer with double voice-coil, stiff aluminium cone, solid aluminium die-cast basket and elastic rubber surround. Extremely low mechanical and electrical losses due to vented pole plate, vented damper and capton voice coil carrier. Fast pulse response due to light weight aluminium cone. Suitable for subwoofers, which should be connected in stereo mode.

BG 13 8 OHM

13 cm (5") full-range driver with tweeter cone. Very evenly spread frequency response and excellent voice reproduction quality. High efficiency. For use in larger scale PA arrays or smaller monitor speakers. Typical applications: PA arrays, projection speakers Smaller monitor speakers

BG 30 NG 8 OHM

30 cm (12") woofer with hard cone suspension for keyboard speakers, subwoofers and stage monitors. High efficiency and suitable for sealed and vented systems. High power handling due to magnet vent, capton voice coil carrier and stiff fabric surround.

BGS 40 - 8 Ohm

40 cm (15") woofer with hard cone suspension for P.A. systems, stage monitors and musicians speakers. Solid aluminium die-cast basket for front- or rear baffle mounting. High efficiency and high power handling due to large magnetic drive with vent and 65 mm voice-coil.

BS 130 - 4 Ohm

Structure-borne sound converter for bass frequencies. The units are attached to a surface which is able to resonate, which causes it to oscillate (e.g. a panel of a car body, the base construction of a settee etc.). No enclosed cabinet is required. Using the BS 130 - 4 Ohm, this enables the lowest bass frequencies, such as those used for effects in films, to be reproduced in such a way that they are felt through the body rather than heard.

Please find further information on exciters here: Basic principles of exciter-technology (PDF; 388 KB)

BZ 130 4 OHM

13 cm (5") low-midrange system with a very strong magnetic drive and mounted in a Euro standard basket. The connection terminals are gold plated 4.8 mm and 6.3 mm soldering lugs. Coloration free midrange and high efficiency. Car specific installation is possible, provided that the mounting depth of the large magnet has been considered.

BZ 130 P 4 OHM

13 cm (5") low midrange system mounted in a Euro standard basket and with coated paper cone. With strong magnet system and large cone displacement due to elastic rubber surround.

BZ 160 P 4 OHM

16 cm (6.5") low midrange system mounted in a Euro standard basket and with coated paper cone. With strong magnet system and large cone displacement due to elastic rubber surround.

BZ 300 4 OHM

30 cm (12") subwoofer featuring a coated cone and a solidly constructed metal basket. To provide long cone strokes and high power handling, the driver is equipped with an extended rear pole-plate. Due to the 50 mm voice coil the BZ 300 is suited for high power operation. Suitable for free-air-operation as well as driver for band-pass and vented enclosures.

CF 25 4 OHM

25 mm fabric dome tweeter ferrofluid cooled voice-coil, featuring well-balanced frequency response and high efficiency. Exact reproduction of the high range band, transparent, coloration-free, soft and well-balanced. Installation: Very flexible due to the swivel mounting ring for car doors and dash boards. Mounting accessories are included.

CT 25 4 OHM

25 mm metal dome tweeter with Ferro-fluid-cooled voice-coil, featuring a linear frequency response and a good pulse response. Exact reproduction of the complete high range band, transparent and detailed performance even at highest levels and good omnidirectional sound distribution. Installation: Very flexible due to the swivel mounting ring for car doors and dash boards. Mounting accessories are included.

DAL 13 100 V

Wall/ceiling surface-mounted speakers in semi-spherical plastic housings with perforated sheet covers. Equipped with one high-quality 13 cm full-range loudspeaker. Good music sound and clear voice reproduction. The rear baffle of the loudspeaker is attached to the wall or ceiling using four screws. The transformer can be connected to the 100 volt supply using screw terminals. Next, the housing, clearly marked to prevent incorrect connection, is attached and locked in place via the bayonet mount. Plastics: ABS (UL 94: HB) Typical applications: Design-Wall-mounted/ceiling-mounted speakers in 100V sound reinforcement systems in public areas, schools, hotels etc. Attributes: Moisturised cone 100 V transformer Includes fixing materials.

DHT 9 8 OHM

HiFi horn driver for the high-frequency range above 5000 Hz. Very good pulse response and linear frequency response due to special aluminium diaphragm. High power handling and linear impedance due to capton voice-coil carrier and aluminium voice-coil wire.

DK 130 X - 100 V

Re-entrant horn speaker with 100 V transformer. Compact dimensions an waterproof design. High sound pressure and wide range of frequency response guarantee excellent voice quality. Pivoting metal frame for mounting walls, ceilings, columns etc.

DK 8 D - 100 V/20 Ohm

Re-entrant horn speaker with 100 V transformer and integrated capacitor for line monitoring by impedance measurement. Five-stage level adjustment for 100 V model via knob, in addition 20 Ohm possible. High sound pressure and wide range of frequency response guarantee excellent voice quality. Pivoting metal frame for mounting walls, ceilings, columns etc.

DK 8 P - 100 V/30 W

Re-entrant horn speaker with 100 V transformer. Light grey plastic housing. Level adjustment for 100 V model via knob, in addition 100 Ohm possible. High sound pressure and wide range of frequency response guarantee excellent voice quality. Pivoting metal frame for mounting walls, ceilings, columns etc.

DL 10 20 OHM

10 cm (4") ceiling-mounted speaker with white metal cover (RAL 9010). Suitable for use in all types of hollow ceilings. Easy fitting in round cut-out using spring arms. A push-terminal block allows quick and easy connection. A compact solution for home and professional use with good sound qualities. DL 10 can be supplied painted in other RAL colours on request. Speaker cabinet systems for ceilings are available for these speakers from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet is suitable for the DL 10, Art. nos. 1292-35, 1292-00, 1294-15 and 1294-00 in conjunction with the front ring Art. no. 1293-16. Typical applications: For fitting in hollow ceilings, for music and speech in shops, at home, hotels etc. Attributes: Moisturised cone UV-resistant Metal basket, non-corrodible functionally at low temperature according to EN 60068-2-1 (-40°C; 96h) up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature) Ball-resistant

DL 13/2 - 100 V

13 cm (5") HiFi-ceiling speaker with corrosion free grille, suitable for the installation in suspended ceilings of any material. Equipped with a 2-way coaxial driver. Quick snap-in mounting due to round ceiling cut-out through which the speaker with mounting ring can be installed. A push-terminal block allows a quick and easy connection to the 100-V-network including the eventually necessary level adjustment. A quick-mounting bayonet connection provides an easy installation of the grille. DL 13/2 can be supplied painted in other RAL colours on request. Speaker cabinet systems for concrete ceilings are available from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet series is suitable for our ceiling speakers. Some additional front parts maybe necessary (front rings, mineral fibreboard etc.). More details are available on the Homepage of KAISER (Housing for lamps and loudspeakers). In order to get more detailed information, press the "Technical information" button of the particular product. Fire protection housing systems (F30) are also available (FlamoX).

DL 13/2 8 OHM

13 cm (5") HiFi-ceiling speaker with corrosion free grille, suitable for the installation in suspended ceilings of any material. Equipped with a 2-way coaxial driver. Quick snap-in mounting due to round ceiling cut-out through which the speaker with mounting ring can be installed. A quick-mounting bayonet connection provides an easy installation of the grille. Typical applications: For suspended ceilings in shops, private accomodation, bathrooms etc.

DL 17 100 V

17 cm (6.5") ceiling speaker with corrosion free, mat-white metal grille (RAL 9010), suitable for installation in suspended ceilings. Developed for professional 100 V sound reinforcement systems (transformer version) and domestic applications (8 ohm version). Good music reproduction and clear speech reproduction properties. Solderless level adjustment. Easy installation without screw-mounting. Including self adhesive mounting template.

DL 17 8 OHM

17 cm (6.5") ceiling speaker with corrosion free, mat-white metal grille (RAL 9010), suitable for installation in suspended ceilings. Developed for professional 100 V sound reinforcement systems (transformer version) and domestic applications (8 ohm version). Good music reproduction and clear speech reproduction properties. Solderless level adjustment. Easy installation without screw-mounting. Including self adhesive mounting template.

DL 18 100 V

17 cm (6.5") ceiling speaker with corrosion free, mat white grille (RAL9010), suitable for the installation in suspended ceilings of any material. Quick snap-in mounting due to round ceiling cut-out through which the speaker with transformer and mounting ring can be installed. A push- terminal block allows a quick and easy connection to the 100-V-network including the eventually necessary level adjustment. A quick-mounting bayonet connection provides an easy installation of the grille. DL 18 can be supplied painted in other RAL colours on request. Speaker cabinet systems for ceilings are available for these speakers from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet is suitable for the DL 18, Art. nos. 1293-15 and 1292-00 in conjunction with the front ring Art. no. 1293-20. Typical applications: Ceiling-mounted speakers in 100 V sound reinforcement systems in public areas, schools, hotels etc.

DL 18/1 AB - 100 V

17 cm (6.5") ceiling speaker for PA installations with A/B wiring according to EN 60849. Fitted with a full-range speaker with dual voice coil, two 100 V transformers and two fire-proof ceramic terminals with thermal fuse (fire damage at the speaker does not affect the function of the entire system). Corrosion free grille (RAL 9010), suitable for the installation in suspended ceilings of any material. Quick snap-in mounting due to round ceiling cut-out through which the speaker with transformer and mounting ring can be installed. Connection to the 100-V-network by means of screw terminals, level adjustment with plug-in contacts at the transformers. A quick-mounting bayonet connection provides an easy installation of the grille. DL 18/1 AB can be supplied painted in other RAL colours on request. Speaker cabinet systems for concrete ceilings are available from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet series is suitable for our ceiling speakers. Some additional front parts maybe necessary (front rings, mineral fibreboard etc.). More details are available on the Homepage of KAISER (Housing for lamps and loudspeakers). In order to get more detailed information, press the "Technical information" button of the particular product. Fire protection housing systems (F30) are also available (FlamoX).

DL 18/1 B 100 V

17 cm (6.5") ceiling speaker with aesthetically appealing grille, suitable for the installation in suspended ceilings of any material. Easy mounting due to solid spring arms into round ceiling cut-out through which the one-piece speaker can be installed safe against ball throwing. A push terminal block allows quick and easy connection to the 100-V-network.

DL 18/1 F 100 V

17 cm (6.5") ceiling speaker with a corrosion-resistant grille (RAL 9010), suitable for installation in suspended ceilings of any kind. Quick snap-in mounting due to round ceiling cut-out through which the speaker, transformer and mounting ring can be installed. The attractive grille is quickly and conveniently fixed with a bayonet locking mechanism. Any volume adjustments necessary are carried out by a simple spring clip mechanism. The DL 18/1 F is equipped with an integrated fail-safe mechanism which ensures that a burnout in one loudspeaker does not lead to a failure in the entire system of connected speakers. The loudspeaker is equipped with ceramic terminals, a thermal fuse and a heat-resistant high-temperature wiring so that it conforms to both Dutch (NEN 2575) and British (BS 5839) regulations for alarm systems. Ceramic terminals for rapid connection to the 100 V mains. A second terminal enables the wiring to be looped through to the next speaker. The cable clamps supplied ensure the incoming cables of 8, 12 or 16 mm diameter are firmly held. These loudspeakers are also fitted with a series capacitor for monitoring the circuit. Typical applications: Ceiling-mounted speakers in 100 V sound reinforcement systems in public areas, schools, hotels etc.

DL 18/2 8 OHM

17 cm (6.5") HiFi-ceiling speaker with corrosion free grille, suitable for the installation in suspended ceilings of any material. Equipped with a 2-way coaxial driver. Quick snap-in mounting due to round ceiling cut-out through which the speaker with mounting ring can be installed. A quick-mounting bayonet connection provides an easy installation of the grille. DL 18/2 can be supplied painted in other RAL colours on request. Speaker cabinet systems for ceilings are available for these speakers from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet is suitable for the DL 18/1 and DL 18/2, Art. nos. 1293-15, 1293-00, 1292-35, 1292-00, 1294-15 and 1294-00 in conjunction with the front ring Art. no. 1293-20. Fire protection housing systems (F30) are available (FlamoX). Typical applications: For fitting in hollow ceilings, for music and speech in shops, at home, hotels etc. Attributes: Moisturised cone UV-resistant Metal basket, non-corrodible functionally at low temperature according to EN 60068-2-1 (-40 °C; 96 h) up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature)

DL 8 20 OHM

8 cm (3.3") ceiling-mounted speaker with white metal cover (RAL 9010). Suitable for use in all types of hollow ceilings. Easy fitting in round cut-out using spring arms, electrical connection by spring-loaded terminal clips. A compact solution for home and professional use with good sound qualities. DL 8 can be supplied painted in other RAL colours on request. Speaker cabinet systems for ceilings are available for these speakers from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet is suitable for the DL 8, Art. nos. 1292-35, 1292-00, 1294-15 and 1294-00 in conjunction with the front ring Art. no. 1292-01. Typical applications: For fitting in hollow ceilings, for music and speech in shops, at home, hotels etc. Attributes: Moisturised cone UV-resistant Metal basket, non-corrodible functionally at low temperature according to EN 60068-2-1 (-40°C; 96h) up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature) Ball-resistant

PH 8 REAR

Piezo tweeter for the highrange above 3000 Hz. Very high efficiency with high power handling and balanced frequency response. Rear mounting.

Suitable for 2- and 3- way combinations without cross-over. Very good value for money.

DMR 35 8 OHM

35 mm (2") HiFi fabric dome driver with square front plate for the midrange between 1200 and 10000 Hz. Linear frequency response due to the optimised double coated dome and in conjunction with a highly damped surround. High power handling due to ferrofluid cooled voice-coil.

DSM 25 R - 8 Ohm

25 mm (1") High-End titanium dome driver for the highrange above 2000 Hz. Due to the enormously strong and ultra-light titanium dome and in conjunction with a highly damped sypronyle surround, linear frequency response and no partial oscillations. Due to the enormously high magnetic flux in the ferrofluid-filled air-gap high efficiency and high power handling are possible.

DT 90 8 OHM

20 mm (0.8") polycarbonate HiFi driver with square shaped front plate for the highrange above 3000 Hz. Balanced frequency response and good omnidirectional sound distribution. High power handling due to ferrofluid-cooled voice-coil.

DTW 110 NG 8 OHM

25 mm (1") HiFi fabric dome driver for the highrange above 2000 Hz. Due to the optimised dome and the highly damped surround, a linear frequency response without partial oscillations is guaranteed. With a high magnetic flux in the ferrofluid-filled air-gap a high efficiency and a high power handling can be realised. Especially suitable for 3-way combinations in conjunction with the fabric dome tweeter G 50 FFL.

DTW 72 4 OHM

14 mm (0.6") polycarbonate dome driver for the highrange above 4000 Hz. Balanced frequency response and excellent omnidirectional sound distribution. Due to the strong magnetic drive and the ultra-light dome in conjunction with the ferrofluid-cooled voice-coil good efficiency and high power handling.

DTW 8.12 NG 8 OHM

25 mm (1") HiFi fabric dome driver with rectangular shaped front plate for the highrange above 2000 Hz. Coated dome with linear frequency response and strong magnetic drive for high efficiency. High power handling due to ferrofluid-filled air-gap. Suitable for 2- and 3-way combinations. Due to the front plate shaping especially suitable as replacement unit for many Hifi speakers.

DTW 95 NG 8 OHM

25 mm (1") HiFi fabric dome driver with square shaped front plate for the highrange above 2000 Hz. Due to the optimised dome and the highly damped surround, a linear frequency response without partial oscillations is guaranteed. With a high magnetic flux in the ferrofluid-filled air-gap, high efficiency and high power handling are possible. Especially suitable for 3-way combinations in conjunction with the fabric dome tweeter G 50 FFL 8 Ohm.

DTW 97 8 OHM

20 mm (0.8") HiFi driver with titanium coating for the highrange above 3000 Hz. Balanced frequency response and good omnidirectional sound distribution. High power handling due to ferrofluid-cooled voice-coil.

DX 16 4 OHM

16 cm (6,5") 2-way coaxial loudspeakers with polypropylene cone and polycarbonate dome tweeter. Integrated crossover (capacitor) for the tweeter. Very balanced sound. Straightforward installation in vehicles with cutouts for 16,5 cm speakers. Door and rear tray installation possible using mounting ring and grille.Mounting accessories and protective grilles are included.

DX 4x6 P - 4 Ohm

Oval 2-way coax speaker with polypropylene diaphragm and European standard basket. Integrated crossover (capacitor type) for the tweeter. Simple fitting in vehicles with cut-outs for 9 x 15 cm speakers. Packed in pairs, includes fitting materials. Typical applications: Vehicles Mobile homesAttributes: Moisturised cone Metal basket Coaxial speaker

DX 6X9 4 OHM

3-way triaxial highly efficient oval speaker systems featuring polypropylene woofer and conical midrange. Powerful bass and clean-cut higher frequencies. Particularly suited to installation on the rear shelf. Easy to connect thanks to integrated crossover for midrange and tweeter.Mounting accessories and protective grilles are included.

EZ 97.10 - 100 V

Slim-line speaker system using 100 V technology, equipped with eight 8 cm drivers and one tweeter. Wallmounting is possible using wall brackets on the end faces or universal-joint brackets (optional). Can be swivelled in any direction after fitting. White painted aluminium cabinet and protective grille (RAL 9010). EZ 97.10 can be supplied painted in other RAL colours on request.

F 8 SC 4 OHM

Magnetically shielded 8 cm (3,3") full-range driver with balanced frequency response. Particularly suitable for smaller multimedia applications. Very good value for money.

FR 10 H 4 OHM

10 cm (4") fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 10 cm speakers. Typical applications: Vehicles Mobile homes Attributes: Moisturised cone Metal basket

FR 10 H 8 OHM

10 cm (4") fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 10 cm speakers. Typical applications: Vehicles Mobile homes Attributes: Moisturised cone Metal basket

FR 10 P 4 OHM

10 cm (4") fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 10 cm speakers.

FR 10 WPX - 4 Ohm (black)

Saltwater resistant 10 cm (4") full-range driver with moulded plastic cone, plastic basket and grille. Absolutely corrosion-resistant and waterproof due to encased magnet and silicon-coated leads. Black colour.


*) IP protection class for front side when built into a sealed enclosure

FR 10 WPX - 4 Ohm (white)

Saltwater resistant 10 cm (4") full-range driver with moulded plastic cone, plastic basket and grille. Absolutely corrosion-resistant and waterproof due to encased magnet and silicon-coated leads. White colour.


Typical applications

  • Loudspeaker for saunas
  • Outdoor PA systems
  • Loudspeaker for solariums and damp locations
  • Boats, ships and open vehicles

Attributes

  • Temperature resistant up to 120 °C
  • Suitable for outdoor applications
  • Seawater proof
  • Ball-resistant


*) IP protection class for front side when built into a sealed enclosure

FR 13 8 OHM

13 cm (5") full-range loudspeaker with an inverted cone. Uniform frequency response and powerful low-frequency output. Simple installation e.g. in vehicles with loudspeaker mounts for 13 cm loudspeakers. Typical applications: Built into cars, busses or trains Electronic musical instruments Monitoring speaker for electronic devices

FR 13 P 4 OHM

13 cm (5") fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 13 cm speakers. Includes fitting materials

FR 16 P 4 OHM

16 cm (5") fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 16,5 cm speakers.Includes fitting materials

FR 4X6 P 4 OHM

Oval fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 9 x 15 cm speakers.

FR 8 R 4 OHM

8 cm (3.3") fullrange speaker with good bass reproduction, balanced frequency response and high efficiency. Round basket without mounting ears. Typical applications: Narrow network column speakers Control speaker for electronic devices Ceiling-mounted speakers in railway carriages and busses Electronic musical instruments

FR 9 P 4 OHM

8,7 cm (3,4") fullrange speaker with tweeter cone and standard basket. Simple fitting in vehicles with cut-outs for 8,7 cm-speakers. Includes fitting materials

G 25 HE 8 OHM

25 mm (1") high-end textile dome unit with compensating magnet to suppress stray magnetic field. Very well-balanced sound properties with "silky-smooth" treble. The perforated pole piece guarantees low resonance frequency, enabling an initial frequency of 1500 Hz. The powerful magnet and the voice coil, filled with low-viscosity ferrofluid, guarantee both high efficiency and good power handling capability.

G 25 ND 8 OHM

25 mm (1") textile dome unit with an oval front plate. This highly efficient neodymium magnet arrangement enables both minimum fitting dimensions and maximum magnetic shielding. Can be used above approx. 2000 Hz. The ferrofluid in the air gap guarantees high power handling capability even at this low separating frequency.

GF 250 2 X 4 OHM

25 cm (10") High-End woofer with black glass fiber cone, solid aluminium die-cast basket and elastic rubber surround. Designed for multi-purpose applications due to 2 x 4 ohms double voice-coil, with excellent properties as 8 ohms drivers in series configuration. The long stroke voice-coil in conjunction with the extended rear pole plate, the vented damper, the vented magnet and the capton voice-coil carrier guarantees long strokes and highest power handling.

K 40 SQ-FL - 8 Ohm

4 cm (1.6") miniature speaker with plastic diaphragm (Mylar) and metal basket. Very flat design. Thanks to its compact dimensions, suitable for signal output in machines and other equipment where space is at a premium.

KL 33 - 100 V (black)

33 cm spherical loudspeaker as bass reflex system. Equipped with one 17 cm bass/midrange and four midrange/highrange drivers which have a good directivity pattern at off-axis angles and therefore provide a uniform and pleasant sound quality. The KL 33 can be connected to a 100 V network or a normal amplifier (4 ohm).


KL 33 - 100 V (white)

33 cm spherical loudspeaker as bass reflex system. Equipped with one 17 cm bass/midrange and four midrange/highrange drivers which have a good directivity pattern at off-axis angles and therefore provide a uniform and pleasant sound quality. The KL 33 can be connected to a 100 V network or a normal amplifier (4 ohm).

M 10 4 OHM

100 mm (4") cone midrange driver for the midrange band between 1000 and 5000 Hz. Due to the enclosed rear no separate midrange housing construction is necessary. Extremely good price/performance ratio in 3-way combinations in conjunction with cone tweeters.

ML 10 T - 100 V

10 cm (4") Ceiling/Wall speaker with rear cover and 100 V transformer. Good voice reproduction. Compact dimensions. Mounting guide (PDF; 410 KB)

ML 16 100 V

Ceiling speaker with high efficiency and good speech reproduction. Especially for installation in metal ceilings (e.g. ships). A push-terminal block allows a quick and easy connection to the 100-V-network including the eventually necessary level adjustment. After screwing the speaker to the ceiling a quick-mounting bayonet connection provides an easy installation of the grille. Typical applications: Installation in metal ceilingsAttributes: Functionally at low temperature according to EN 60068-2-1 (-40 °C; 96 h) Up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature) Moisturised cone UV-resistant Metal basket 100 V transformer

PH 8 FRONT

Piezo tweeter for the highrange above 3000 Hz. Very high efficiency with high power handling and balanced frequency response. Front mounting.

Suitable for 2- and 3- way combinations without cross-over. Very good value for money.

PH 8 REAR

Piezo tweeter for the highrange above 3000 Hz. Very high efficiency with high power handling and balanced frequency response. Rear mounting.

Suitable for 2- and 3- way combinations without cross-over. Very good value for money.

PL 13 D - 100 V

Twin radiating loudspeaker with cylindrical plastic housing (ABS) and sturdy mounting bracket (aluminium). Fitted with two full range loudspeakers and 100 V transformer. Cables can be concealed in the bracket if required. High level of voice quality. Particularly suitable for corridors and other elongated rooms.

PL 13 DBS - 100 V

Twin radiating loudspeaker with cylindrical plastic housing (ABS) and sturdy mounting bracket (aluminium). Fitted with two full range loudspeakers and 100 V transformer, ceramic terminal and a thermal fuse. Conforms to both Dutch (NEN 2575) and British (BS 5839) regulations for alarm systems. Prepared to insert fire-proof cabling with a cable connexion. Cables can be concealed in the bracket if required. High level of voice quality. Particularly suitable for corridors and other elongated rooms.

PL 5 - 4 Ohm

5 cm (2") projection loudspeaker with cylindrical plastic housing and adjustable mounting bracket for universal fixation. The 2-m-connection cable provides a high variability. The loudspeaker is suitable for hands-free equipment, radio communication systems and applications where small projection loudspeakers are needed.

PL 5 - 8 Ohm

5 cm (2") projection loudspeaker with cylindrical plastic housing and adjustable mounting bracket for universal fixation. The 2-m-connection cable provides a high variability. The loudspeaker is suitable for hands-free equipment, radio communication systems and applications where small projection loudspeakers are needed.

PR 250

Passive radiator consisting of the basket and oscillator from the TIW 250. Fitted with an adjustable mass in place of the voice coil. Fine tuning is by means of adding screw-on sections. An M12 x 40 bolt and an M12 nut are included in the package. The mass can be increased by adding heavier washers or a longer bolt. Instructions on calculating the mass are included.

SC 4 ND 4 OHM

Magnetically shielded HiFi titanium dome tweeter for the high-frequency range above 2000 Hz. Due to the highly damped sypronyle surround the frequency response is free from partial oscillations. The ferrofluid-filled air-gap provides a high power handling. Magnetic shielding and compact dimensions thanks to the use of a neodynium magnet system. The latter allows real D`Appolito baffle designs.

SC 8 8 OHM

Magnetically shielded 8 cm (3.3") fullrange driver with cellulose cone and rubber surround. Very balanced frequency response. In conjunction with the shielded tweeter SC 5 8 Ohm especially suitable for small magnetically shielded 2-way combinations such as Surround center speakers and multi media systems. Typical applications: Surround centre speakers Multimedia systems Video monitoring screens TVs Computer terminals

SL 70 - 4 Ohm

6.6 cm (2.6") full-range speaker with high efficiency and balanced and wide frequency response.

*) IP protection class for front side when built into a sealed enclosure

SL 87 WP 4 OHM

Water proof 8 cm (3.3") full-range loudspeaker with a transparent plastic cone and rubber sealing ring. High mean sound pressure. Optimised for voice and signal output. Magnetically shielded. Properties: Plastic: Mylar (Membrane)

SL 87 WP 8 OHM

Water proof 8 cm (3.3") full-range loudspeaker with a transparent plastic cone and rubber sealing ring. High mean sound pressure. Optimised for voice and signal output. Magnetically shielded. Properties: Plastic: Mylar (Membrane)

T 130 4 OHM

13 cm (5") mid-bass unit with a red foam surround and a coated cone. Good power handling capability and excellent value for money. Particularly well suited as a mid-range unit in a 3-way combination using the woofers from our T series e.g. on the rear shelf in vehicles.

T 200 4 OHM

20 cm (8") woofer with red foam surround, coated cone, magnet vent and extended rear pole plate. High power handling and excellent price/performance ratio. Recommended cabinets: 20 l ; 1x BR 19.24 (length 12 cm) 30 l ; 1x BR 15.34 50 l ; 1x BR 15.34 (length 10 cm)

T 250 4 OHM

25 cm (10") woofer with red foam surround, coated cone, magnet vent and extended rear pole plate. High power handling and excellent value for money.

T 300 4 OHM

30 cm (12") woofer with red foam surround, coated cone and extended rear pole plate. High power handling and excellent value for money.

TI 100 M 8 OHM

10 cm (4") high-end mid-bass unit featuring a completely new type of diaphragm cone made of pure titanium. The carefully designed cone combines with the shape and material of the surround and the adhesives to avoid cone resonance. The shape of the basket with its large aperture and rear-ventilated centring piece coupled with the open voice coil with its phase plug produce the lowest possible mechanical losses and produce a correspondingly high mechanical Q-factor. As a result of the construction using double magnets the TI 100 M 8 OHM is also magnetically shielded. In comparison with the TI 100 8 OHM, this unit has a shorter voice coil and a particularly lightweight fabric surround but generates more sound pressure in the medium range. The TI 100 M 8 OHM is ideal when used as a mid-range unit e.g. in 3-way high-end speakers.

TIW 250 8 OHM

25 cm (10") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 50 mm voice-coil, capton voice coil carrier and magnet vent.

TIW 360 8 OHM

30 cm (12") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 60 mm voice-coil, capton voice coil carrier, vented damper and magnet vent.

TIW 360 DS 2 x 4 OHM

30 cm (12") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 60 mm voice-coil, capton voice coil carrier, vented damper and magnet vent. Easy connection due to the double voice coil (2 x 4 ohms) allowing the unit to be connected up for 2 ohm or 8 ohm use.

TIW 360 X 8 OHM

30 cm (12") High-End woofer with a particularly low resonance frequency. Double cellulose cone, large-scale magnet arrangement and a heavy die-cast aluminium basket. Excellent power-handling capabilities with minimum mechanical power loss due to the 60 mm voice coil mounted on a capton coil carrier, the pressure vented pole piece and the rear-vented damper. Particularly suitable for closed cabinets and transmission line applications.

TIW 400 8 OHM

40 cm (15") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 60 mm voice-coil, capton voice coil carrier and magnet vent.

TIW 400 DS 2 x 4 OHM

40 cm (15") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 60 mm voice-coil, capton voice coil carrier and magnet vent. Univesal connection possibilities due to the double voice-coil (2 x 4 ohms) allowing the unit to be conncted up for 2 ohm ore 8 ohm use.

TL 300 MH

120° exponential horn in conjunction with the 1" driver DR 45 N 8 OHM (Art. No. 3053). TL 300 MH is a horn made of beech-wood, manufactured with highest workmanship, suitable for High-End midrange units due to its high quality finish.

UL 12 100 V

2-band compact speaker with very modest dimensions but excellent sound reproduction, natural sound and linear frequency response across the entire response range. Maximum sound pressure is made possible by its robust and highly efficient construction. The drivers used are all magnetically shielded. Ideally suited to numerous flush-mounted or concealed applications due to the tidy, unobtrusive design. Typical applications: conference facilities multimedia

UL 12 8 OHM

2-band compact speaker with very modest dimensions but excellent sound reproduction, natural sound and linear frequency response across the entire response range. Maximum sound pressure is made possible by its robust and highly efficient construction. The drivers used are all magnetically shielded. Ideally suited to numerous flush-mounted or concealed applications due to the tidy, unobtrusive design. Typical applications: conference facilities multimedia

UL 87 4 OHM

Cabinet speaker, equipped with one 8.7 cm full-range loudspeaker. Black plastic housing. Remove the grille and loudspeaker to fit. The housing can then be fitted to a flat surface directly, without a holder. To this end, there are two screw holes in the base.

UL 99 100 V

Cabinet-housed loudspeaker for indoor and outdoor PA applications. Black plastic cabinet, fitted with an oval full-range speaker and transformer for use in 100 V mains supply systems. Rapid electrical connections thanks to spring-loaded terminals. Suitable for both voice and music reproduction. Good voice reproduction properties and high sound pressure. Typical applications: Indoor and outdoor PA applications Use in conjunction with a lighting system, e.g. at railway stations, halls etc.

W 100 SC 4 OHM

Magnetically shielded 10 cm (4") HiFi low-midrange driver. Apart from that compatible with W 100 S 4 OHM .

W 100 SC 8 OHM

Magnetically shielded 10 cm (4") HiFi low-midrange driver. Apart from that compatible with W 100 S 8 OHM .

W 130 SC 4 OHM

Magnetically shielded 13 cm (5") HiFi low-midrange driver. Apart from that compatible with W 130 S 4 OHM . Recommended cabinets: 7 l (closed) 20 l ; 1x BR 6.8 (length 4 cm) 30 l ; 1x BR 19.24 (length 12 cm)

W 130 SC 8 OHM

Magnetically shielded 13 cm (5") HiFi low-midrange driver. Apart from that compatible with W 130 S 8 OHM .

W 130 SE - 8 Ohm

13 cm (5") HiFi low-midrange driver with flat basket edge, coated paper cone, elastic rubber surround and 25 mm voice-coil. Suitable as woofer and due to the very balanced frequency response also as low-midrange driver especially in large 3-way speaker systems.

W 170 4 OHM

17 cm (6.5") HiFi woofer with very good price/performance ratio. Suitable for simple 2-way speakers and car rear tray systems. Especially suited als replacement driver for many HiFi speakers.

W 170 SC 4 OHM

Magnetically shielded 17 cm (6.5") HiFi woofer. Apart from that compatible with W 170 S 4 OHM .

W 170 SC 8 OHM

Magnetically shielded 17 cm (6.5") HiFi woofer. Apart from that compatible with W 170 S 8 OHM.

W 200 NG 4 OHM

20 cm (8") woofer with air-dried and reinforced cone. Very good price/performance ratio. Suitable for simple 2-way speakers and car rear tray systems.

W 200 NG 8 OHM

20 cm (8") woofer with air-dried and reinforced cone. Very good price/performance ratio. Suitable for simple 2-way speakers and car rear tray systems.

W 200 SC 4 OHM

Magnetically shielded 20 cm (8") HiFi woofer. Apart from that compatible with W 200 S 4 OHM .

W 200 SC 8 OHM

Magnetically shielded 20 cm (8") HiFi woofer. Apart from that compatible with W 200 S 8 OHM .

W 250 NG 4 OHM

25 cm (10") woofer with air-dried cone and cone reinforcement. Very good price/performance ratio. Suitable for simple 2- and 3-way systems, subwoofers and car rear tray applications.

W 250 NG 8 OHM

25 cm (10") woofer with air-dried cone and cone reinforcement. Very good price/performance ratio. Suitable for simple 2- and 3-way systems, subwoofers and car rear tray applications.

W 300 4 OHM

30 cm (12") woofer with air-dried cone and pressure vented pole piece. Can be fitted at front or rear. Excellent value for money coupled with very good power-handling capabilities. Particularly suitable as a replacement for HiFi speakers.

W 300 NG 4 OHM

30 cm (12") woofer with air-dried cone and magnet vent. Very good price/performance ratio and high power handling.

W 300 S - 4 Ohm

30 cm (12") HiFi woofer with powerful drive, extended rear pole plate and long stroke surround. 50 mm voice-coil for high power handling. Very suitable for large 3-way and 4-way combinations and for high power handling subwoofers. Recommended cabinets: Volume/Principle BR-Channel fb 70 l/bass reflex 2 x BR 15.34 36 Hz 100 l/bass reflex 2 x BR 15.34 (length 12 cm) 32 Hz 1 x BR 25.50 (length 7 cm) 150 l/bass reflex 2 x BR 15.34 (length 7 cm) 29 Hz

W 300 S - 8 Ohm

30 cm (12") HiFi woofer with powerful drive, extended rear pole plate and long stroke surround. 50 mm voice-coil for high power handling. Very suitable for large 3-way and 4-way combinations and for high power handling subwoofers. Recommended cabinets: Volume/Principle BR-Channel fb 70 l/bass reflex 2 x BR 15.34 36 Hz 100 l/bass reflex 2 x BR 15.34 (length 12 cm) 32 Hz 1 x BR 25.50 (length 7 cm) 150 l/bass reflex 2 x BR 15.34 (length 7 cm) 29 Hz

W 400 S 4 OHM

40 cm (15") HiFi woofer with powerful drive, extended rear pole plate and elastic long-stroke surround. 50 mm voice-coil and magnet vent for high power handling. Suitable for large 4- way combinations and for high power subwoofers. Excellent price/performance ratio.

W 400 S 8 OHM

40 cm (15") HiFi woofer with powerful drive, extended rear pole plate and elastic long-stroke surround. 50 mm voice-coil and magnet vent for high power handling. Suitable for large 4- way combinations and for high power subwoofers. Excellent price/performance ratio.

WB 13 100 V/8 OHM (silver)

2-way compact speakers in a sturdy plastic housing (silver), fitted with one 13 cm woofer and one tweeter providing broad frequency response. Well suited for music and voices. Universally applicable to professional PA or in the home. Can be run as a 100 V system or as 8 ohm units due to an integrated transformer. 100 V transformer and 8 ohm mode are selected using a knob. Swivelling fixing bracket allows the speakers to be mounted horizontally or vertically, as required, and the housing is equipped with a threaded hole for attaching to a bracket or swivelling arm.

Typical applications:

  • Conference facilities
  • Multimedia
  • Outdoor useAttributes:
  • UV-resistant
  • 100 V transformer
  • Weather-proof plastic cabinet
  • Plastic: ABS (UL 94: HB)

WL 13 N AB - 100 V

Double wall speaker for PA installations with A/B wiring according to EN 60849. White wooden cabinet and metal grille. Fitted with two high quality full range speakers, two 100 V transformers and two fire-proof ceramic terminals with thermal fuse (fire damage at the speaker does not affect the function of the entire system). High efficiency, clear speech reproduction properties and good music reproduction. Removable rear panel for easy fitting to the wall using two screws. Connection to 100 V network and level trimming by means of ceramic terminals.

WL 13 NR P - 100 V

Wall-mounted speaker with a volume control-knob and priority relay, wooden cabinet and metal grille. Fitted with a high quality full range driver. Removable rear panel for easy fitting to the wall using two screws. Good music reproduction and clear speech reproduction properties. Connection to 100 V network and level trimming by means of spring terminal. Also available: WL 13 N - 100 V (without volume cotrol) WL 13 NR - 100 V (with volume control, without priority relais)

WL 13 PR P - 100 V

Wall-mounted speaker with a volume control-knob and priority relay, white plastic cabinet and metal grille. Fitted with a full range driver. Good music reproduction and clear speech reproduction properties. Connection to 100 volt network and level trimming by means of spring terminal. Also available: WL 13 P - 100 V (without volume cotrol) WL 13 PR - 100 V (with volume control, without priority relais)

WL 21.33 - 100 V

Wall-mounted speaker with a white plastic cabinet and metal grille. Fitted with a full range driver, a 100 V transformer and a fire-proof ceramic terminal with thermal fuse (fire damage at the speaker does not affect the function of the entire system). Very high efficiency, clear speech reproduction properties.

WS 13 BF 8 OHM

13 cm (5") HiFi low-midrange driver with 25 mm voice-coil, elastic rubber surround and coated paper cone. Due to balanced frequency response and high efficiency suitable as woofer and low-midrange driver.

WS 13 E 4 OHM

13 cm (5") low-midrange driver with paper cone and elastic rubber surround. Due to the special basket design especially suitable as replacement driver for many HiFi speakers.

WS 25 E 4 OHM

25 cm (10") woofer with coated paper cone, rubber edge and extended rear pole plate for long strokes. Due to the basket design especially suited as replacement woofer for many standard HiFi speakers.

WSP 21 S 8 OHM

20 cm (8") HiFi woofer with highly damped nawi-shaped polypropylene cone. High power handling due to capton voice-coil carrier and magnet vent.

WSP 26 S 8 OHM

25 cm (10") HiFi woofer with highly damped, nawi-shaped polypropylene cone. High power handling due to capton voice-coil carrier and magnet vent.

_More speakers_

For data of older speakers (starting from 1984) please see: "Download T/S parameters" (172 KB)